Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Guys , m having a problem when upgrading the IOS on my VSS
i am using the following page for instructions.
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst6500/ios/15-1SY/config_guide/sup2T/15_1_sy_swcg_2T/virtual_switching_systems.html#pg...
I have depoloyed 2 catalyst 65k as a single entity VSS ; m getting the following error when saving the configration on the primary/local player.
Dec 4 23:15:16.971: %PFREDUN-SW1-4-BOOTSTRING_INVALID: The bootfile s2t54-ipservicesk9-mz.SPA.151-2.SY2....
We recently purchased a license i.e. ASA 5512-X CX Application Visibility and ControlAs part of the process we had to install ASA-CX module ; We caught up in trouble while doing that.As per the manuals , we did upgrade the ASA software (to 9.1.2) alo...
no boot system flash s2t54-boot-mz.SPA.151-2.SY4a.bin
doesnot make any difference
i also checked the image using the 'verify' command , and all had gone good
sh run | in bootboot-start-markerboot system flash bootdisk:s2t54-boot-mz.SPA.151-2.SY4a.binboot system flash s2t54-boot-mz.SPA.151-2.SY4a.binboot-end-markerdiagnostic bootup level minimal
--------------
show run | be boot ...
HERE GOES YOUR REQUESTED OUTPUTS!!
show run | in bootboot-start-markerboot bootstrap tftp s2t54-ipservicesk9-mz.SPA.151-2.SY2.bin 255.255.255.255boot system flash s2t54-ipservicesk9-mz.SPA.151-2.SY2.binboot-end-markerdiagnostic bootup level minimal-...
I dont have the access of the firewall at the moment, so 'show module' i cant have it right nowbut yeh the image name that you specified , thats what i put in there.there are the few errors that i remember I encounted during the whole setup."unable...
