I am new to SAN, I am looking at a requirement to use a 5548 UP to bridge FCOE to FC using NPV.   The 5548UP needs to be configured with NPV mode to connect to upstream FCF through NP mode. The downstream traffic is from a blade chassis through a Nex...

I have a distributed ISE 2.0 deployment with 6 nodes (2 X PAN, 2 X MNT, 2 X PSN), there is no firewall in the middle. I have successfully added all 5 nodes into the PRI PAN and all the messages show successfully added for each of them. However, afte...

A couple of issues with 2700 running Flexconnect. I have an AP2700 running in flexconnect mode controlled by a vWLC8.2 running in the lab.  The config is really simple: an local switching SSID bridged into the native VLAN as the AP itself. We have i...

We are deploying an ISE based .1x. The design is to use eap-tls for machine and eap-peap for user. Apparently EAP-Chaining is recommended, but can anyone confirm if we can do chaining based on machine TLS and user PEAP. I have done some investigation...

I have a use case to provide a guest portal with EUP page only. ie. user only needs to accept the agreement and they should be given internet access, without need to enter username/password or self service. Is there an easy way to achieve this on ISE...