Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all.Can someone please clarify some of my questions from the following statement. "The Ethernet hardware sends this packet onto the Ethernet wire and then immediately receives this packet back again". Here is the URL.http://www.cisco.com/en/US/tec...
Hello there.We currently have a project for 21 sites running CME and a central site also running CME. I have read that it is ideal to have a gatekeeper if you already have many remote branches. Can you suggest an appropriate router model for the gate...
Hi guys.We have a current requirement that has the following specifications.Minimum of 20 Analog trunks, 1 x E1 PRI ISDN trunk, with SIP license (60 licenses), with IVR, call data recordingI have configured a 2911 with the appropriate licenses in CCW...
Hi.I understand that configuring a stubby or totally stubby area injects a default route for other areas or routes endorsed by an ASBR. I was worrying about the delay caused by extra hops in an area if only one router was to be the internet gateway. ...
Hi.I am currently studying multi area OSPF neighbor relationship topics.Question is, why are some networks designed to have routers on a shared ethernet segment?I am only familiar with routers representing branch offices connected to the HQ site. So ...
Hi Hermanus.Thanks for responding to my posts. As seen in my previous post, I need three (3) EM3-HDA-8FXS/DID to come up with at least 20 analog trunk ports. However, I also need to include one VWIC3-1MFT-T1/E1 and one HWIC-2T which will occupy the E...
