Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hey Guys, There were power issues at a location today and now the uc540 does not start up fully. I connected a console cable and it looks like the startup process is in a loop. I have already tried a replacement power adapter with no difference. Im n...
Hey guys, I would love some help on this, is there anyone who has successfully got fac working on the uc540 system ?I have followed the document on here to setup pin on my uc540 but when I dial a number there is a10 second long pause then the call is...
Hi All,I was wondering if the uc540 has a feature to create user pin\codes which would override dialing plan restrictions based on how the pin\code is setup.Example: User A has a pin: 845601 and she can dial this before to enable her to dial an inter...
Hi John,I have figured it out, changed the session target ip from the voice vlan ip address of the uc540 (10.1.1.1) to the ip of the uc540 on the data vlan and it is working fine, This might be a routing issue. Note I installed the uc540 behind a cis...
Thanks John I followd that document originally to setup this feature, One question though what would the username password option under an ephone config accomplish, example below from the full config above. Would this not cause the pin prompt to be s...
Hi Christian, thanks for getting back to me. This is the full config, also if i can remember i think the interdigit timeout is setup as 5 seconds. !! Last configuration change at 17:42:57 PST Tue Oct 1 2013 by administrator! NVRAM config last updated...
