Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Please see attached. Is what I’m trying to do possible with SG500x (as the core) and sg500/300 (access/slave switches)? If so, can I use 4 sfp ports from the sg500x to connect the four access switches and 2 gigabit Ethernet ports to connect the other...
We have five public ip addresses from Comcast. Right now they are being used by one firewall and four routers (one public ip per device). Is it possible to have a single ASA5500-x to utilize all five public ips? For example, have the outside interfac...
What exactly is the IPS edition of the ASA5515-X? is it the firewall edition + x year(s) of IPS security license bundle?Also, i'd want ASA5515-SSD120-K9 if i want the ASA5515-X + IPS/AVC/WSE (will be getting ASA5512-AWI3Y and smartnet) and i should...
What NGFW features can be enabled if I purchase the ASA5515-x (ASA5515-SSD120-K9) and 3 year license of AVC, WSE, and IPS (ASA5515AWI3Y)? I was under impression that all three services can be enabled on a single ASA5515-x unit but I read somewhere t...
Hi everyone,I’m seeking advice in designing voip network. Is there any reason to stick with the following:1. one network2. one Ethernet cable run to each cubicle for both data and voice3. setup QoS on a router/firewallWhen we can run two Ethernet cab...
Hi Adargiel,Thank you so much for replying. I think I get it now:-Stack two sg500x (use 2 SFP, use ring topology)-connect access switches (sg300s and sg500s) to the sg500x stack using gigabit Ethernet portsI can also create a stack on the access swit...
The four routers are used to create isolated test networks. It is no big deal if I cannot use them behind the ASA as the devices behind the routers are nothing critical. It sounds like I’d need to change the number of public IPs on either Comcast or...
Hi Jouni, Yes we’ve been allocated the /29 subnet. One IP is indeed configured on the ASA outside/external interface. I tried to assign more public ip to another interface but like you said, ASA didn’t like it as it was using the same subnet. So it s...
