Hi Guys, Need some suggestions here..CE is running ebgp with SP MPLS PE router. I am receiving around 7k prefixesshould I run iBGP between the CE between CE and CoreSW1? or OSPF
Hi all, Got a queryI have got following command configured under two interfaces connected to WLC distribution portsgi1/2qos vlan-basedgi1/3qos vlan-basedI have a port-channel configured for both gi1/2 and gi1/3Do I need to configure qos vlan-b...
Hi all, Got a query I have got following command configured under two interfaces connected to WLC distribution portsgi1/2qos vlan-basedgi1/3qos vlan-basedI have a port-channel configured for both gi1/2 and gi1/3Do I need to configure qos vlan...
Hi Guys, I have disabled 11Mbps and still the channel assignment is same. Can you please attached. Same problem with another site Country is indonesia and channels available are 149, 153, 157, 161
Hi Leo thanks so if I disable 11mbps how it would help in channel assignment under 802.11a/n as I have issues with few channel repetitions like channel 40 and 44
Hi Leo, The heat map which I sent is showing 802.11a/n clients. We do have some 802.11b clients so can't disable 11mbps. Is there anyother way to tweak WLC to remove channel over lapping
Hi Leo, thanks for your reply Please find the attached 802.11a/n and 802.11b/g data rate. Could you please let me know the reason as well. Much appreciated thanks
