Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Simple networkASA 5505 connected to 2911 Router connected to a 3560 switch. Access to the internet is working. Access to the router from outside is set. Access to the computer inside the network is working and IP is being handed out by the router. Ca...
I've got an ASA that seems to be a bit jumpy. I think there is an ACL conflict that is keeping things from working right but I can't seem to find it. Yes we have a need for this many ACLs. Pinging from inside the tunnel I can hit the outside addre...
Call Manager 8.6.1Just took over the network this week. First question of ultimate importance. Can you make it so I can dial the missed calls on my phone without having to dial an 8?My first thought was to make a line that didn't need to dial the 8...
Got back into the unit finally. Logging had been left on and there was a storm of EIGRP failures. Must have been tanking the CPU cycles. All stable now. Rebuild will proceed shortly. Thanks for you helpful suggestions John
Cable Modem ----- Firewall -------- Router ------- Switch ------- ComputerFirewall is accessible from inside and outside of network. Computer I'm logged into using Teamviewer. Can't hit the switch or the firewall.Suggested there might be an IP confl...
Pinging from the firewall as well as the computer inside. Inside barely gets a response. The firewall gets between 10-40% responses. ping 10.2.18.1 repeat 100 from the firewall.
Thanks John I considered that I may had used too many connections and they weren't clearing so I had the person on site reboot the unit. Didn't help. I'm not physically near the site and I don't have console connection there. Might have to work out...
For future reference - I found the solution it seems. I set up hairpinning inter and intra. That solved the problem of routing the 51.x network so I could look at the acls. Here's the results and the commands I used. Once I had an odea which acl wa...
