About Paul Robinson

Paul Robinson · 10-24-2018

Firstly just to let you know I'm not a network support technican but have some basic knowledge. I need some advice and some possible direction. So thought this would be the best place to come. So I currently have an SG300-20 which is used to wire my ...

Paul Robinson · 01-24-2015

I’m currently in the process of expanding my network having bought a second Cisco SG300-20 which is now sitting in my lab, my current setup is described below Internet^|Draytek Router 192.168.1.1^|Cisco SG300-20 192.168.1.2^|VLAN 12 Workstations inte...

Paul Robinson · 11-16-2013

I'm not sure this is possible but is the DHCP server able to allocate a secondary DNS server.There only seems to be the option to put a single DNS entry in.I current have DHCP setup to allocate a internet based DNS (Google's DNS on 8.8.8.8) so my wor...

Paul Robinson · 11-08-2013

Hi,I've just managed to get my Cisco switch configured correctly with all required VLANs with help from Tom on the board.https://supportforums.cisco.com/message/4084345#4084345I however want to further expand my network within my house and have a spa...

Paul Robinson · 11-01-2013

Hi,I'm fairly new to networking so please be gentle. I'm trying to setup a number of vlans for my home lab.I've recently moved jobs and taken an Oracle Apps & Middleware role so need to start picking up Apache, EBusiness Suite, Load Balancers etc so...

Paul Robinson · 10-24-2018

Rick, So would you just configure the second switch as a Layer 2 in that case. I think my main aim was to keep the traffic between the server and nas local on VLAN 20 on the SG300-10 to maximize performance. Can I configure LAG's with the switc...

Paul Robinson · 01-27-2015

Hi Aleksandra,I have been having a play with my switch and moved my esxi server to another couple of ports. The interface that talks to the NAS on VLAN 20 via the management gateway on VLAN 13 is now able to talk to the NAS.The only difference betwee...

Paul Robinson · 01-26-2015

Hi Aleksandra, Im still having issues with my setup. The servers I have connected have VLAN tagging enabled Previously I had my esxi server connected via two nics with ports configured on my Layer 3 switch prcswitch01 as follows Port 1 Trunk VLAN 1...

Paul Robinson · 01-25-2015

Ok, think I have sussed it. I've made the following changesTrunk between prcswitch01 port gi2 ------> prcswitch02 port gi1Both have been given access to all vlans I want across the devices using TAGGED VLANS I have then configured the ports which ...

Paul Robinson · 01-25-2015

I have managed to get my second Layer 2 switch to talk to the Layer 3 switch but still having issues with getting the vlans working. I have setup a single vlan 20 as a test on my Layer 2 switch but cant talk to the device I have connected These are t...

Member Since	‎10-31-2013 08:08 AM
Date Last Visited	‎10-26-2018 12:04 AM
Posts	26
Total Helpful Votes Received	5

User Statistics

User Activity

Advice Needed on VLANs for second switch

Cisco SG300 Network Expansion (Configure 2 Switches)

SG300 DHCP Server Secondary DNS Allocation

Interswitch VLAN routing SG300 - Netgear GS108V2

SG300-20 Vlan Setup for ESXi server and workstations

Re: Advice Needed on VLANs for second switch

Hi Aleksandra,I have been

Hi Aleksandra, Im still

Ok, think I have sussed it. I

I have managed to get my