Hi AllI have a 1852i in ME mode running code 8.10.151.0 . I have 350Mb line and Wireless client get 30Mb max. All 7 clients are connecting to 2.4Ghz 802.11n (20Mhz). Band Select is enabled Even If I bring a client (iphone 11) next to the AP it still ...
I have a 5506-x ASA running version 6.2.3.4 (build 42) for my firepower. It appears that even though i have the license installed, the AMP database hasn't been able to update since mid of August.
The problem seems to be with the certificate not b...
Hi
I am running the following sfr but when trying to update to 6.2.3.3-76 from the GUI it fails
ModelASA5506Serial Number*****Software Version6.2.3 (build 83)OSCisco Fire Linux OS 6.2.3 (build13)Snort Version2.9.12 GRE (Build 327)Rule Update Versi...
Hi
My UK (SKY) Fibre provider requires MER authentication so I need to have my ASA 5505 to perform that. Even though ASA 5505 supports DHCP with option 61 it appears that you can only use either MAC close or the default settings "Cisco-<MAC address>...
HiWould OpenDNS be able to provide list of domains being generated using DGA? This would be quite useful for individuals who want to build on DGA detection algorithms but do not have access to huge amounts of sample. There are few of them available o...
Thanks Scott, If i disable the flexconnect, 5GHz is broadcasted. However, I need to be able to do wlan vlan tagging (each wlan gets the IP via DHCP which is configured on my ASA)Example below of my Mobility express config FlexConnect Vlan mode :.......
Thanks Scott when creating an open SSID with just 5Ghz radio policy, the SSID is not even broadcasted. None of the clients are able to see or manually connect to it