Hi All. Im trying to accomplish the following, appreciate if you could confirm my action.Scenario. Swicth A -> Switch B -> Switch C Vlans 10,20,30,40,50 are trunked from 'A' through 'B' to 'C' I need to remove and delete vlan 30 from Switch B.I inten...

Hi All, Hi All, Taking the cisco example below, which demos how to PBR. access-list 1 permit 209.165.200.225access-list 2 permit 209.165.200.226!interface ethernet 1 ip policy route-map Texas!route-map Texas permit 10 match ip address 1 set ip preced...

Hi All, Taking the cisco example below, which demos how to PBR. access-list 1 permit 209.165.200.225access-list 2 permit 209.165.200.226!interface ethernet 1 ip policy route-map Texas!route-map Texas permit 10 match ip address 1 set ip precedence pri...

Hi, are there any type of debug monitoring cli commands that should be used with caution and that could crash a switch (L3 switch)? Just out of interest. Thanks

Hi. I have a stack of 2 non Poe 3750x switches with a single 350watt psu in each with power stack cables connected. I have purchased an additional psu to slot into switch1. I need to take the existing psu offline for maintenance. Is it as simple as s...