Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Looking to upgrade client controller to a 3504. Client has 3502i's, which I see are supported for the 8.5.x code but they are -A domain. Will the WLC be able to support -A domain and -B domain APs on 8.5?
Our company is soon going to deploy 8821 wireless phones using SIP. I am running a test environment to look at a few features on the wireless controller. I've got SIP snooping enabled along with other configuration changes to the radios as stated in ...
I have setup MAC Filtering and everything is working great. From what I can see, MAC Filtering will only work for a WLAN that is configured for MAC Filtering and if the Profile Name field is set to that SSID or All WLANs. Also from what I'm seeing, t...
I've got a 2504 WLC running 8.0.133 code. I've uploaded everything for the Web Auth page and it works great for all devices except my IPhone6. The IPhone doesnt seem to want to redirect to the custom page (like it doesn't even try) then opening up Sa...
I performed a Link Test on the WLC GUI and receive all the information I am looking for except the extremely important client SNR values. This is happening to multiple 7925's and 7921's. I am also running into issues on another controller that even w...
That's our exact situation, I just want to make sure if the controller was configured for the US on 8.5 that it would accept the -A domain APs. I didn't know if there was an attempt to phase out those APs with the newer codes as I couldn't seem to fi...
Not from the wireless phone. I am seeing this on the WLC, if you run "show ap stats 802.11a <Cisco AP> " from the WLC CLI and go down to the SIP CAC statistics. Apparently all is well because I can view this information from the CLI but apparently th...
I did reboot and forget/reconnect multiple times. I was updating OUI.txt file so I could better classify devices and allow our client to be a sleeping client for 30days. Just so a certain model tablet didn't have to reauth constantly. The issue seeme...
