Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
What im trying to do:1. Have the switch do a showtech every 2 hours2. Send the showtech to flash3. The first showtech will be techinfo1.txt4. The second will be techinfo2.txt5. The next showtech will overwrite techinfo1.txt6. The next showtech will o...
Hi,
On 4500 IOS does, it does not appear on XE to my knowledge.
As an alternative, have you considered blocking unicast floods on the interface?
Regards,
Anthony
What is your full parameter configuration?
As a 1941 router have you tried 9600 baud, 8 data bits, no parity, 1 stop bit, and no flow control.
Regards,
Anthony
Hi Rickard,
The update timer is 30 seconds by default and is seen from the output:
R3#show ip protocols | i Sending|Invalid Sending updates every 30 seconds
The garbage collector is an overlapping timer that occurs after two missed updates.
In thi...
Hi jbcom,
Yes, the Cisco 881 comes with advanced security default feature set which allows SSL VPN and up to 20 IPSEC tunnels for your site to site.
Regards,
Anthony
Adam,
To start off, keep in mind that double-tagging starts when an attackers send a frame to a connected switchport with two VLAN tags in the header.
1. Double-tagging allows you to reach the victim a switch away from the attacker.
2. Correct, ac...
