Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have some 6500 switches and would like to set up an isolation vlan, where ports on this vlan can only talk to a few servers on my network and unable to talk to anything else on the vlan or my network. Is this possible on the switch level and if so...
I need to upgrade my IOS since my current IOS on this switch doesnt support MAC Traps.The folloing is information off my switch as it stands today.IOS (tm) s3223_rp Software (s3223_rp-ADVIPSERVICESK9_WAN-VM), Version 12.2(18)SX F10, RELEASE SOFTWARE ...
I have a few 65xx and having some issues with getting "snmp traps mac-note change add/remove:on the ports On my switch running IOS v12.2(33) SXH1 / ROM V12.2(17r) SX 3 i can enter the added/removed command on a range of ports no issues. On my swithce...
Hello I have a few Cisco switchs at my site, 37xx and 65xx's and they all auth to my network AD for access. I want to set up a local SSH account with Priv 15 on the switches as well for local log in incase AD is down or if for some reason the switch...
HelloI have many Cisco switches 65xx, 37xx at my company with a lot of vlans already configured. I need to create a new isolation vlan that will not be able to communicate with my other existing vlans. We are setting up a NAC solution at my company...
Thx, is the Sup32 card IOS what i need if i want to upgrade the IOS on my switch, there are so many choices to pick from on the Cisco site, I just wanted to make sure that is the main IOS that controls the switch and the feautres suchs as MAC traps,...
Thanks for the info, guess i will move forward with update of the IOS. Its been a while since i have done an IOS upgrade, on the cisco site would i grab the Cat 6500 Supervisor Engine 32? It looks like the latest ISO here is from 30 may 2008.
Rick, thanks for the response and sorry for the confusion.I meant to add it to my existing config. So if I understand you correctly, I should just add the following to my existing config with is currently set up for AD/Radius: aaa authentication lo...
The switch currently has the following config:aaa auth login defualt group radiusaaa auth login console lineaaa auth enable default enableaaa auth default group radiusaaa auth exe console noneradius-server host 10.x.x.x auth-post xxxx acc-post xxxx k...
