12-24-2014 01:07 PM - edited 03-07-2019 10:00 PM
I have a few 65xx and having some issues with getting "snmp traps mac-note change add/remove:on the ports
On my switch running IOS v12.2(33) SXH1 / ROM V12.2(17r) SX 3 i can enter the added/removed command on a range of ports no issues.
On my swithces running IOS V12.2 (18) SXF10 / ROM V12.2(17r) SX 3 i am unable, only commands is Link-Status when i enter ?
I am guessing this is due to the ISO version being different on the switches, is there a way to enable traps on the ports (snmp traps mac-note change added/remove) like on the other switch without having to upgrade the IOS?
Solved! Go to Solution.
12-24-2014 06:49 PM
Unfortunately upgrading the IOS is the only option.
BTW, the versions of IOS you are running on these devices are at least 6 to 7 years old.
So upgrading to a newer version is probably a good idea.
HTH
12-24-2014 03:04 PM
This command was introduced in 12.2(33)SXH. So it is not support in SXF.
http://www.cisco.com/c/en/us/td/docs/ios/lanswitch/command/reference/lsw_book/lsw_m1.html#wp1142567
HTH
12-24-2014 06:44 PM
Thanks for the conformation. Is there anyway to configure it on this version or is and upgrade of the ios the only option?
12-24-2014 06:49 PM
Unfortunately upgrading the IOS is the only option.
BTW, the versions of IOS you are running on these devices are at least 6 to 7 years old.
So upgrading to a newer version is probably a good idea.
HTH
01-06-2015 01:30 PM
Thanks for the info, guess i will move forward with update of the IOS. Its been a while since i have done an IOS upgrade, on the cisco site would i grab the Cat 6500 Supervisor Engine 32? It looks like the latest ISO here is from 30 may 2008.
01-06-2015 01:34 PM
Remember to backup your current config before upgrading.
Good Luck
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide