Dears,
i have ucs c 220 series and contained 2 power supply their Firmwares not the same. So, i need any method to can upgrade power supply firmware to be same.
Thanks,
Dears,
I have switch down in my network and when i need to take the configuration from configuration archive tab i found all devices can access it but i can't access the down switch it was dimmed and can't open it to get the configuration archived b...
Dears,
we have WISM2 and configure it with option 82 on DHCP & Interfaces as shown on attached to send AP-SSID through dhcp.
I want to know which debug i will do on WLC to see option 82 on the dhcp request, as i tried (debug dhcp packet enable & de...
Dears,
I have WISM 2 and try to configuring the syslog server for Access points with the below command.
config ap syslog host global syslog_server_IP_address
But i found all APs communicate directly with syslog server & creates syslog host for each...
Dears,
i have a problem with Cisco prime infrastructure 2.2 (CPI) is that send huge number of email notifications for switches ports (Down or Up).
When i edit configuration of switches & switches and hubs from severity critical to severity minor act...
i searched in the communities and found thatissue related to IOS bug.So, IF i need to upgrade which release will solve this issue.
The reload we can't consider it as work around.
Witting feedback the soonest please.
I searched in communities and found that issue related to IOS bug. So, if i need to upgrade which release will solve this bug.
The reload we can't consider it as awork around.
