Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
The setup:
Two ACS's in a network, configured as primary/secondary on the devices, yet not set up as a distributed deployment, each ACS is pointed toward different DC's (Active Directory). When the Primary ACS loses it's connection to Active Director...
I'm currently having an issue with a 7965 that I haven't run across yet. I reinstall firmware for Voips on a regular basis, but have yet to come across this issue. I'm using TFTPd32 as I normally do.
After hooking the phone up and doing a factory re...
I'm currently learning the basics about frame-relay, and everything makes perfect sense so far. There is one thing I just don't get though. Lets say we have three routers going through a frame-relay switch. R1 is connected to two other routers, R2 an...
Thank you for your reply. The version of ACS is 5.7.
The thing about this setup is there is no secondary DC (I know, I know, but I didn't set this up). Each ACS is in a different location and pointing to a different DC, but only one DC. The second ...
So, I ended up resolving this issue myself, but I'd thought I'd document what was happening in case anybody has this issue in the future.
On our CUCM we are currently using sccp9.3.1-SR4 for 7965s. Whenever a a factory reset was performed on these p...
