Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
hi guys,I would appreciate some assistance here. every 3 weeks or so, we have an issue with remote sites connecting to our head office. it occurred again this morning, which led to me capturing logs from WAN router melrtrw001, core router melcore001 ...
hi guys,I would appreciate some assistance here. We have a primary head office & a DR site. Routers at both sites connect to our carrier for an IP VPN service using BGP. BGP configs on each router advertise a default route 0.0.0.0. #sh ip bgp neigh...
hi guysI upgraded from 5.3.0.40.9 to 5.5.0.46 using the application upgrade bundle which went mostly good except that CLI SSH access to the ACS is now not working. It allows me to login, however immediately throws an error:% Error: Unable to launch A...
Hi all,We have two routers, running HSRP between them.Our ISP have reported that their PE router (192.168.10.81) is getting hammered with attempts from 192.168.10.84 (our secondary router) trying to establish BGP with it.HSRP seems to be configured c...
Hi Akash/Peter,Thanks for your input. MTU has been checked and verified to be OK. Issue likely to be isolated to core router IMO, as the cpu utlisation is consistently quite high >90% during BH. Would this cause packet loss on network?It seems to be ...
hi Paul,verified this, config looks fine. eventually found that the neighbor x.x.x.x default-originate command was essentially advertisign the default route so applied route-map to end of that command with the 2x prepend and problem resolved.thanks t...
hi Milan,I tried prepend 5 times however still no difference. Carrier does allow bgp selection based on AS-path.currently the route-map looks like this:route-map OPI-route-advertisement permit 10 match ip address prefix-list LOCAL-NETS!route-map OPI-...
Hi Milan,Thanks. Answers below:Does it provide an MPLS backbone to you? YESAre you using the same AS number on all your sites or different ones? Same ASAny way, what about advertising the default route from your DR site with the site AS number prepen...
