About Jeremy Dubrulle

Jeremy Dubrulle · 01-25-2021

Hi! I am trying to test how the route-maps are working in ACI. I have an OSPF interco with a router. I have tested the "default-export" route-map, it permits to:Redistribute any static route configured on my node if configured explicitly under the ro...

Jeremy Dubrulle · 01-21-2021

Hi! I see in the documentation that when we have 1 L3out with 2 nodes with each an SVI connected to a different router, a shared BD is created between the nodes (https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/applicatio...

Jeremy Dubrulle · 11-17-2020

Hello, I would like to configure MACSEC between 2 6807-XL on fiber interfaces. I can't find if:- It is supported on C6800-16P10G modules, I knwo this is a replacement for old modules doing macsec but it is not written that it does macsec https://www....

Jeremy Dubrulle · 10-15-2020

Hello, I have a need to enable broadcast on a specific SSID with 9800 WLC.I know it's impossible with old WLC but is it possible with 9800 ? Is there a way to enable this only on specific AP with flexconnect for example ? My goal is to avoid enabling...

Jeremy Dubrulle · 10-13-2020

Bonjour, Je déploierai bientôt 2 C9120AXI-EWC-E. Je lis la fiche technique et je suis un peu confus (https://www.cisco.com/c/en/us/products/collateral/wireless/embedded-wireless-controller-catalyst-access-points/white-paper-c11-743398.html#EWCHAactiv...

Jeremy Dubrulle · 01-27-2021

Ok that doesn't exist in OSPF. Thank you. Did someone try route-map with OSPF ?

Jeremy Dubrulle · 01-26-2021

Yes I know this doc.. I wanted to know more about your implementation. Understand why I can't make the custom RM work and especially why I can't select it under other menus when it is created under Policies

Jeremy Dubrulle · 01-26-2021

When I create it under the menu you give, I can't use it anywhere. Not under L3Out, not under BD, ... Could you help me I must be doing something wrong.

Jeremy Dubrulle · 01-26-2021

You are using route-map that are not default-export ? You just configure it under your L3Out, then apply it under the BD and it is redistributed ?

Jeremy Dubrulle · 01-25-2021

I'm using APIC 4.2(4) and this doc https://www.cisco.com/c/en/us/support/docs/cloud-systems-management/application-policy-infrastructure-controller-apic/211586-ACI-Route-Profile-Usage.html Did anyone try to work with route-map (not default) ?

Member Since	‎01-07-2014 12:59 AM
Date Last Visited	‎03-26-2021 04:26 AM
Posts	115
Total Helpful Votes Received	22

User Statistics

User Activity

OSPF route-map not working if not default

L3Out encap with sub-interface

MACSEC on 6807-XL

Broadcast forwarding WLC 9800

EWC AP Diffusion SSID / EWC AP SSID broadcasting

Re: OSPF route-map not working if not default

Re: OSPF route-map not working if not default

Re: OSPF route-map not working if not default

Re: OSPF route-map not working if not default

Re: OSPF route-map not working if not default