Hi all,I`ll try to setup the sg300-10p with multiple vlans and networks. Buti i want to use only one dhcp server. How does theinsert look like to configure it on an2012r2 server?
Hi Tom,thanks. That's what I've feared. On the catalyst switches I've read that I can query this by CLI. But i found no command for it in the sg300 cli reference. Is there any hidden one?Last question before hard wireshark work ... :-)ChristianSent f...
So whati neee is the information how remote id, agent id, relay agent innformatin looks like. This i have to configure on the dhcp serverSent from Cisco Technical Support Android App
Hi tom,I will search a little bit more... From the screenshot in the article and the article itself i didn't thought on multiple addresses for the dhcp server. I thought on different hex values given by SG300 which can be used by the dhcp server. My ...
Hi Tom,I know this article, thanks. But within the article there is screenshot for configuring the Option with a long hex-value. I thought that the sg300 is setting this value, so that it can be queried by the Dhcp Server. And i thought that it has t...
Hi tom,That's what i assumed. I switched to L3 .But how does Option look like so that i can configure the Microsoft DHCP Server for this Option? Which value dies it have? Mac address?
