I have four portis configures as FC uplink per FI and FI woking in end host mode.I have 24 blades with two vHBA's. vHBA0 and vHBA1.24 WWPN address are registered on SAN uplink from only 1 FC uplink.Same case in the other brocade.Which is something we...
On every object, when I right click, I see copy option. What is the use of it ?I need to move few policies from root to sub-org.Is deleting the policies and creating is the only option ?
I need to change the system name of the Fabric interconnectsI have given eg. EDCDthe FI now have EDCD-AEDCD-BI need to change it to ... ECCD-AECCD-B..is it possible ?
I don't find any documentation on the web for firmware upgrade from 2.1(3a) to 2.1(3b)..is it wise to follow this link http://www.cisco.com/en/US/docs/unified_computing/ucs/sw/upgrading/from1.4/to2.1/b_UpgradingCiscoUCSFrom1.4To2.1.html ?Any best pra...
I got this error on one chassis among many on 2.2(5c) firmware level. Since this was a green filed implementation, decommisioning and re-ackowledging the chassis cleared the error.
Hi Walter, I have a similar issue but the blade model is B200 - M3. The service profile association fails @ 71% stating "local disk firmware update failed". The local disks are of same model as shown in the b200-m4 document. Is replacing the hard dis...
Yes the certificate is signed by the root CA.I have two certificates in the certificate chain which was downloaded from the CA.I have pasted both the certificate in the trusted point and the certificate sections and unable to access UCSM ...invalid c...
