Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Are you trying to use pass-through or SR-IOV for this 9800-CL GigabitEthernet2?I'd probably NOT try to do that to make it as simple as possible.SR-IOV on the Cisco VIC has a boatload of restrictions.
Only way I know to access bootflash requires TAC access. Generate a UCSM tech support and look at file: UCSM_A_TechSupport.tar.gz/ls_l.outCompare FI-A and FI-B to spot any differences.
Does the vNIC have an uplink port (physical external port)? The screenshot is when that page is still loading, so not 100% sure.On the packet capture. . .Does the ARP request packet show a .1q VLAN tag?Does the ARP response packet show a .1q VLAN tag...
The Cisco VIC is a bit of an oddball in the networking world. Historically all packets leaving the VIC ALWAYS had a VLAN tag which confuses many switches.https://www.cisco.com/c/en/us/products/collateral/interfaces-modules/unified-computing-system-ad...
