About Michele Toblini

Michele Toblini · 10-22-2020

i tried rebooting and resetting. AP Running Image : 8.5.140.0Primary Boot Image : 8.5.140.0Backup Bo...

Michele Toblini · 10-21-2020

already done without success

Michele Toblini · 10-21-2020

the licences are not a problem, all controllers are able to take all APs. Also the host name is corr...

Michele Toblini · 10-21-2020

Hi guys,we have 3 WLC 5520 in 8.5.140.0 and i had to reboot all of them to get rid of new mobility. ...

Michele Toblini · 06-10-2020

Hi Scott, thanks for the clarification but i looked at the documentation and it is not written in an...

Michele Toblini · 06-10-2020

my plan was to get rid of 3650 Converged access anyway. so what you are saying is that 9800 doesn't ...

Michele Toblini · 06-10-2020

https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-8/b_c9800_wireless_controller-...

Michele Toblini · 06-10-2020

Hi guys, my situation is the following: 5520 anchor guest with an old 8.2 code connected to several ...

Michele Toblini · 03-02-2020

how do you know if they are using their private phone?

Michele Toblini · 03-02-2020

Hi,i got several WLCs with several SSID. I noticed that, with a smartphone you can connect to our en...

Michele Toblini · 12-15-2019

thanks for the reply but i wrote this thread after reading your documentation and it's not clear.als...

Michele Toblini · 11-22-2019

Hi,I'm deploying wired dot1x with trustsec and I was wondering what would have happened if ISE wasn'...

Michele Toblini · 09-09-2019

Sorry guys, I am stubborn and I found out the solution. When I set up the Posture rule I checked a s...

Michele Toblini · 09-09-2019

Hi guys, I'm trying to configure Posture for windows clients. I had anyconnect but just vpn module. ...

Michele Toblini · 04-16-2019

I found the bug related to 4500-x, https://quickview.cloudapps.cisco.com/quickview/bug/CSCup89543 Pr...

Re: AP High Availability not working for some APS