Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Testing Phase Three-way ConnectionI need to migrate a traffic path which is going through Fortinet firewall device right now.Once the migration is done, Data Center network(192.168.1.0, 192.168.9.0) will pass Meraki straight without Fortinet Fortiga...
Hello my Meraki Warriors ! I am trying to advertise a host route(/32) from a secondary data center.The MX is terminating its Auto-VPN and is formed a OSPF neighbor with the DC switch. Since MX is on its transparent mode, I cannot add the route from ...
I was designing a data center with Meraki's recommendation.https://documentation.meraki.com/MX/Deployment_Guides/VPN_Concentrator_Deployment_GuideIt is an one-armed VPN concentrator method which I turned on OSPF to advertise routes dynamically.Now I ...
I am trying to filter a host route(/32) with an IP prefix-list. I will use it on OSPF distribute-list inbound.
Right now I am using an access-list and it working. However, the list is getting longer.
router ospf 1 router-id 192.168.19.2 area 0...
It could be a WIFI clients moving around your building. Switches remember the IP Address and its MAC, then it gets the new IP address, before your switch flushes the MAC.
@Todd Wiler I am having the exact same issues so opened a case a couple of months ago.Meraki Tech replied...=======The name you mentioned looks like a MDNS hostname learnt by the Dashboard. This happens when the client is reporting a hostname via MDN...
I got this email from my re-seller,===============Due to international 15% tariffs with China, Cisco has raised their prices across the board after July 31st.
@AndrejRistovski8973 \As you added a route table on resource group where vnet1 belongs, you will need to create a route table on the resource group where vnet2 belongs. And put the LAN ip address of vMX.I used the youtube to set up my vMX @ Azure.htt...