The explanations of the differences between the technoliges in the above posts answer what you need. But I wouldn't say what are the pros and cons of each technolgy. It all depends on the customer requirement. You cant say L3 VPN is better than L2 VP...
What does your topology look like?You have two ports from the same switch, which are then bridged? Perhaps a etherchannel would work as expected. When I use bridge ports for VPLS ect, its usually for two seperate sites on the same me-3600. If the sam...
I would say on the service instance set encapsulation default, and perform no tag rewrite, just send it though fully tagged. If I had the equiptment I would lab up, tagging the native vlan on the Cusctomer switch as well, and monitor the results. It...
Not 100% sure what you mean by conflict with the SP BPDU, as PE-PE is usually MPLS. So if you had an xconnect a the edge UNI, facing customer A, sending acccross the SP Core to Cust B, if the SP on the service-instance allows the flooding/sending of ...
The problem is this:The output is quite misleading on the 3600’s .It’s says evaluation and not in use.Index: 2 Feature: 10GEUpgrade Version: 1.0 License Type: Evaluation License State: Inactive ...
