Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Have a customer with all APs already associated to their main vWLC running 8.3. Created a new vWLC to act as their secondary controller. Statically assigned WLCs in HA tab for all APs. None of the APs will join the controller. APs are 3602i, 3702i, a...
I've got a switch stack of 3 WS-C3650-48PQ. Currently ports 1/1/1 and 1/1/2 are servicing 1 gig connections. Ports 2/1/1, 2/1/2, 3/1/1, & 3/1/2 are all servicing 10 gig connections. I've got a device I've patched into all the open ports and none of t...
Just plugged in 5 3602i APs and instead of joining the controller for this building they joing a controller for a different building. Not sure what to look for on the controllers or what to post...but why would this happen? How can I get them off the...
Yes. We rebuilt the new secondary controller and got the AP to join, but with other errors. Found the bug https://bst.cloudapps.cisco.com/bugsearch/bug/CSCva69352 that was specific to two virtual WLCs used this way. Under "Controller > Mobility Manag...
(Cisco Controller) >debug pm pki enable(Cisco Controller) >*spamApTask7: May 21 14:42:10.147: sshpmGetCID: called to evaluate <cscoSha2IdCert>*spamApTask7: May 21 14:42:10.147: sshpmGetCID: failed to find matching cert name cscoSha2IdCert*spamApTask7...
(Cisco Controller) >debug capwap packet enableWarning! Enabling this debug with large number of AP's connected, May flood console with message logs !!!.Are you sure you want to continue? (y/N)y(Cisco Controller) >(Cisco Controller) >*spamApTask7: May...
