Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All, Some one can explain me if is possible to configure a VPN client Backup on RV340?The customer can connect the VPN (ipsec) to the RV perfectly, but if the active/main ISP link goes down,the user can´t connect.We are using Shrew VPN client on t...
Hi All,I´ve configured a VPN Client on MX64 but the user can´t reach the file server on Azure.The remote user is under the network 192.168.77.0/24 and the File Server (Azure) is under the network 10.10.4.0/24, and his can reach the corporate network ...
Hi All,Recently I got some Rogue SSIDs on Air Marshall portal.For my surprise the Rogue SSIDs are from local machines, the users are known.Someone can help with this alarm?
Hi !!
I´m working in a project with BE7000M, with Redudancy (2 x BE7000M).
I´ve selected the CUCM 12.x with UCL Enh Licenses.
Have I to duplicated the CUCM licenses and UCL Enh licenses or there is a way to share the license with the redundant BE7000...
Hi All,We´re working in a project, where the customer have 02 ISP providers (they are an autonomous system)My question is: can I connect the 02 links directly on MX84 configured with BGP protocol or, must I have to connect a front end Router, such a...
I´ve experienced this problem today and reseted to factory default but the loggin failed, the sympton is the same, the circle in static mode. Someone can help?
@Nolan Herring Thanks for the tip, really had not put a route to the network 192.168.77.0/24 at Azure network.I added a route and it is now working.Thank you!
