Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,Currently we are using CSS11155 to load balance the traffic for our server farm. The diagram as follow:firewall (10.10.10.1/24) | |CSS11155 (VIP: 10.10.10.100/24, VLAN1: 10.10.10.254/24) | |Servers (Default Gateway: 10.10.10.1/24)Now I...
Hi All,We want to use syslog to monitor SNMP activity like people try to poll the RO community. Which kind of syslog level I should use? I don't want to waste lots of router / switch 's resource.On documents I found command "set logging level snmp se...
Hi All, Can I setup two interface on 3030 as internal interfaces? Each of them will connect to two stateful failover PIX firewalls' one interface. In case primary PIX firewall is down, I can use another interface on VPN connect to secondary PIX. Than...
Hi All,I am doing some testing on ipsec-manual. Everytime when I configure transform-set with esp-des and esp-sha-hmac, it will not work and there is "IPSEC(manual_key_stuffing): keys missing for addr 11.11.11.12/prot 51/spi 0" in debug message. But ...
First please check if your VPN profile is correct, also make sure the location of your profile is under /etc/CiscoSystemsVPNClient/Profiles/ directory. Let me know if you still have problem.Banlan
Hi Gilles,Thanks for your reply. Currently the firewall has one DMZ which connect to CSS and our server farm. The configuration is working fine, we don't want to change this configuration. Now we want to add another DMZ on same firewall, also we need...
Hi Matthew,Thank you for your reply. Acctually we already order the upgrade CD. But I couldn't find any way I can transfer my configuration on 3.1 to 4.1, cause they are using different OS. It there any tools available for migration?Banlan
