Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello!I use AnyConnect VPN Secure Mobility Client and ASA 5515 and faced with truble: only 10 or 20 people can establish VPN with this ASA and other people can't, they see error: "The vpn connection was terminated due to a loss of communication with...
Hi,In Catalyst 2960 IOS version 12.2(58)SE there is a command "authentication open" when configure an interface, but in IOS version 12.2(46)SE I don't see this command.Can anybody give me this command or analog for this command for 12.2(46)SE?Thanks!
Hi!I have a Cisco APIC fabric with one ACI controller, two leaf swethes and one spine switch with version 3.2 (1m). And I decided to upgrade my fabric and now I have a 4.1(1j) version. I successfully upgraded APIC fabric but now from the APIC CLI I c...
Hi,I have ISE 2.4.0.357.On ISE I configured authentication dot1x for domain PC and MAB for printers and IP Phones. But authentication dot1x doesn't work and in ise logs I see the next error: Failure Reason12953 Received EAP packet from the middle of ...
No, I don't missing this command, I have this one in RADIUS server configuration. I wrote all attributes:radius-server attribute 6 on-for-login-authradius-server attribute 8 include-in-access-reqradius-server attribute 25 access-request include
About multi-auth: it's typical setup for all switchports because somewhere to one interface is connect PC and phone and somewhere only PC.I attach two photo with ISE policies setup.For security reasin I cann't show this log. What exactly you need to ...
There are domain PCs, IP telephones and printers in my network. So, I know how to set up dot1x for domain PCs, but I don’t know how to configure MAB for printers and ip telephones so that domain users can print and make calls.
