Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
hi all ,I am trying to log login access for Telnet to the netwrok devices ,below is the access-list that i used ,access-list 155 permit tcp 140.80.0.0 0.0.255.255 any logaccess-list 155 deny tcp any any range 0 65535 logaccess-list 155 deny udp ...
Hi all,I have problem regarding the Flash upgrade on 3660,I have 16MB on my router so we purchased new 32MB flash to upgrade the existing one as per ciso tac we added the 32MB on bank 0 and 16MB on bank 1 and rebooted assuming that it will add it to ...
Hi all,I have question regarding the USer tracking , last week i added a new 6509 switch device to RME , when i had problems with a particular PC connected to one of the port i tried looking it up in the user Tracking ,wont find the PC connected to t...
HI all,We have a new 6509swith come in with IOS we need to get it on CATOS.Does anyone have a documentation to convert from IOS to catos on 6509 with sup 720 (MSFC3)thanks in advance
Hi all,I tried xmodem with just the new 32 MB flash on bank 0 just when the xmodem download ends it tries to erase the Flash , it gives me this error Erasing Flash at 0x3000000 sector erase failed at location 0x3000000 status ok 20202020 Flash secto...
hi all, On Cisco IOS by configuring username < sdfasdfg> password line vty 0 4 login local if i make changes on the router via telnet , it logs on the CW for any changes made by user. i am looking for similar kind of configuration if possible on the...
hi all,On Cisco IOS by configuring username < sdfasdfg> password line vty 0 4login localif i make changes on the router via telnet , it logs on the CW for any changes made by user. i am looking for similar kind of configuration if possible on the 650...
