About tcp_analysis_flags_eq_1

tcp_analysis_flags_eq_1 · 01-28-2025

Scenario: Printer is connected to WLAN network and authenticated to ISE using MABProblem: MAB Authentication is successful but the MAC address is currently learned at both VLANsVLAN A = Default WLAN VLANVLAN B = Printer VLANI have setup the policy in...

tcp_analysis_flags_eq_1 · 08-07-2024

Hello,I am running WLC HA using N+1 solution wherein the configuration are managed seperately. Current problem is I need to ensure that the changes I have on WLC1 should also be performed on WLC2.What options are available to manage the configuration...

tcp_analysis_flags_eq_1 · 03-04-2024

Hello, I want to verify something wether this is a normal behaviour WLC: 9800-CLAP: C9120Environment: Flex, Local Switch, Central Auth, ISE AuthScenario: Users are already connected to the Wireless, then due to outage on WAN links, the AP losses conn...

tcp_analysis_flags_eq_1 · 12-05-2023

Hello, I want to ask if the issue is related to timers and latency between the authenticator and ISE.I have below setupDomain Laptop -> Get Internal VLANGuest Laptop -> Get Guest VLANBelow is the interface configurationinterface GigabitEthernet2/0/1...

tcp_analysis_flags_eq_1 · 05-19-2022

Hello has anyone deployed a C9800-CL in an Azure environment? I have a question regarding a downgrade as the version isntalled is 17.7.1, Q1: Is it possible to downgrade to an older version 17.3.x as we are still running old APsQ2: Is the downgrade ...

tcp_analysis_flags_eq_1 · 01-28-2025

Hello, Yes, actually just managed to solve this by removing the endpoint from the endpoint group, readding it was able to get the DHCP now.

tcp_analysis_flags_eq_1 · 01-28-2025

Problem is that the MAB endpoint is currently learned from two VLANs and the correct VLAN is not working as I am not seeing an ARP entry for the IP configured on the endpoint, and when I do via DHCP its not getting IP and the state of the endpoint is...

tcp_analysis_flags_eq_1 · 01-28-2025

NAD is C9800 controller, the APs are in FLEX MODE, and yes the VLAN is on the controller as it was able to return it to the endpoint and I am seeing the endpoint in VLAN B as well.

tcp_analysis_flags_eq_1 · 08-08-2024

So, this will not work for brownfield devices wherein there is already existing configuration without having to migrate to intent DNAC managed and provision right?

tcp_analysis_flags_eq_1 · 08-07-2024

Okay provided that it is manual, any other monitoring compliance checks can be done to easily spot the differences

Member Since	‎09-09-2017 07:20 PM
Date Last Visited	‎02-18-2025 07:34 AM
Posts	30
Total Helpful Votes Received	2

User Statistics

User Activity

Dynamic VLAN assignment on Wireless MAB endpoint

Managing Wireless N+1 redundancy Configuration

C9800: AP Behaviour when Disconnected to WLC

802.1x DHCP Assignment Behaviour

Cisco C9800-CL in Azure

Re: Dynamic VLAN assignment on Wireless MAB endpoint

Re: Dynamic VLAN assignment on Wireless MAB endpoint

Re: Dynamic VLAN assignment on Wireless MAB endpoint

Re: Managing Wireless N+1 redundancy Configuration

Re: Managing Wireless N+1 redundancy Configuration