Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Wireless mobile client fails to connect in 2 WLANs (Corp and Guest)
Corp is Radius authentication, Guest in WebAuth. Client was previously connected to both but after disconnecting, was not able to connect again.
From the device it is stuck in Conn...
Hi JB,
Thank you for this detailed steps. Very helpful!
Do we need to restart all the phones after successfully importing the edited file? It is because if we edit the Directory Number 1 by 1 through Call Routing > Directory Number, there is a pr...
Hi Leo, I have edited the post with an update. device is now connecting after reboot. but the CCKM error is still flooding the debug outputs.
Attached are the debug outputs for the NOT CONNECTING and CONNECTED state of the same device.
Here is the whole debug client:
(Primary-WLC) >debug client 98:0C:A5:BB:05:23
(Primary-WLC) >*Dot1x_NW_MsgTask_1: Jun 01 14:55:18.426: [SA] CCKM: Sending CCKM PMK (Version_2) information to mobility group*Dot1x_NW_MsgTask_5: Jun 01 15:44:12.428: [SA]...
