Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi - I've got a C200 M2 that I pulled from a rack unpowered. It had previously been managed by UCS Manager, so I booted into its BIOS and reset its CIMC to factory defaults. Now it DHCPs and I can manage it via its web interface and KVM just fine. ...
Well, I finally got one working (I've got eight machines in this weird configuration).The only thing I found that worked was to reconnect them to a fabric interconnect running UCS Manager 2.2(6f). It was the same FI that the servers were connected t...
Disabling the option ROMs doesn't seem to help. I decided to try plugging it into a fabric extender, hoping that if I decommission it in UCS Manager, it will start working right stand-alone. I get an "illegal FRU" in my server status in UCS Manager; ...
Looks like the mezzanine option ROM is enabled: I think your question is a good one, since I don't see any boot time messages from the RAID controller. Based on the documentation, I expect to be able to get into a RAID configuration tool on boot, bu...
I thought that this was the newest firmware. I updated it using ucs-c200-huu-1.4.3z09.iso, which was the newest thing I saw on the downloads page. Is there a newer version that I should be using?No, I don't see anything useful on the F2 BIOS Boot O...
