Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello, I have a problem of authentication by console. When I connect myself requests to me to user and password and I do not have left in way "INABLE". Entrance commands inable and his password but Error in Authentication sends following mensage "%...
I Have a Router Cisco 1601 Rand didn't have the .bin fileI got the file "c1600-nosy-mz.120-5.T.bin" but direct the problem.I followed the corresponding passes, like these:rommon 1 > confreg 0x2101rommon 2 > resetRouter(boot)>Router(boot)#copy tftp f...
I have a router 1600 and send a similar message to this:Router(boot)> enablepassword:xxxxxxRouter(boot)#I search for the file c1600-y-l.122-10d.bin in their directory and doesn't have it, and I need to load it in my router, but I don't find it in www...
Hello,I have a problem with my [switch] 2950. It doesn't have the file "flash:c2950-i6q4l2-mz.121-11.EA1a.bin" and appear me the dialogue "switch:"I have attempted to copy from other switch via TFTP and I get it, but upon copying it to the switch for...
Rick,I have the fault in line of command who follows:aaa authentication enable default tacacs+ line enable noneSolution:no aaa authentication enable default tacacs+ line enable noneaaa authentication enable default enableThanks to all for your help.N...
Rick:I believe that you have understood well my problem. I connect in the port console using tacacs (ACS v3.3).When authenticating I have left in the first way example:Username: mnunez Password: ******** SW2950 >When entrance the inable way reques...
Well,I already solve the problem. Load a new image in my router but I with the next command:rommon 1> confreg 0x142You must reset or power cycle for new config to take effectrommon 2> initializeSystem Bootstrap, Version 12.0(3)T, RELEASE SOFTWARE (fc...
