Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all!I can't find clear information about trunk side connector type on ONS 15540. As i understand, i should connect fiber optic cable to OADM, after that i connect OADM and transponder with internal pathcords. For internal pathcords on 8-port OADM ...
Hi all!I am very new in optical networks, and I have to design interconnect for two datacenters. It use Fibre Channel (4 links) and GigEth (2 links). It has a 15km fiber between. I can't find CWDM solution for Fibre Channel, so i have to use DWDM sol...
Dear all,I have 8540MSR and 8510MSR, and 8500MGR software. The 8500MGR shows on the picture installed into Catalysts 8-port E1 IMA cards as unsupported. But i can open that cards and see ports and events. Please, help me: customer require that all lo...
I can't find information about IMA support on 4-port E1 port adapter for 85xx MSR. I see a lot of about 8-port E1 IMA PA, but no word about IMA with 4-port E1 PA.Thank you!
It depends. From country, from area of your interest and other. The best field i guess (and cheapest from start) is to maintain ip telephony services. For example, provide international calls via some VoIP gateways, implement prepaid cards technology...
Can i use 15530-10GE-UPLINK (ONS 15530 10Gbps Uplink, 1310nm with SC) cards on both sides for interconnect ONS 15530 devices (as trunk) and 15530-FCGE-8P card (ONS 15530 8-port Fibre Channel/GE Multiplexing Line Card) for client (FC and GE) connectio...
Thank you! But i see, that this cards are supported on 8510/8540. But management software 8500MGR (as i understand, this is extension to Cisco Element Management Framework) show on screen, that it doesn't support this cards. May be Cisco have done so...
