Hello team,
Does ISE support wired access control, automatic dacl/vlan config, authentication, etc with 3rd party switches, mainly 3com 5500 G and H3C 5500??
How do you suggest to do that?
Thanks!
Team, we have sold 4802 model access points to have them in a network with Cisco WLC (in this case version 8.7, the first one to support this AP model) and auth solution with ISE.
However we just found there is not ISE 100% version compatible with t...
Hi, is ISE going to support SHA256 to do SLO in the next releases?Right now we have this info:"For this to work we need to set the secure hash algorithm to SHA1 instead of the default SHA-256.This is set in ISE relying party trust properties under ad...
Hello team,I have a customer that has windows machines. When they activate KVM Hyper-V VM, it is like the network card/adapter of the machine deactivates (something like virtual switch comes in). So it is impossible to have Posture on that machine......
Hello team,I am working in a project where we will have several companies in one campus. All the infra will be managed by the same SP. The SP wants to offer ISE service for the companies inside the campus, but they don't want to use a lot of virtual ...
Who is responsible to validate this compatibility matrix?
https://www.cisco.com/c/en/us/td/docs/security/ise/2-4/compatibility/b_ise_sdt_24.html#thirdpartywlcs
in this document, please, check table 4, WLC5520, there is not compatibility validatio...
Thanks Utkarsh,How is your scenario? to what switch are you connecting your host machine? are the VM's in the host machine in L2 each one with its own IP address? Are you making posture on that environment?
Thanks.My customer's scenario is like this:There are some users who use virtual machines with Hyper-V (not KVM sorry for that mistake). They cant authenticate using 802.1x because there is more than one MAC address trying to register in the same port...