Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Dear all, current we have a very simple RSPAN problem:The topology is as simple as:SW1 --- SW2The configuration is also very simpleSW1:!interface GigabitEthernet3/12 description TO SW2 logging event link-status logging event bundle-status logging eve...
Originally I have such topology:WLAN Client---WLAN Controller----6509 Switch----6509 Switch---FW and Router----InternetThe WLAN clients are assigned IP addresses 172.27.0.0/16 and the NAT is done on the first 6509 switch connecting to the WLAN contro...
Hi everyone, I'm having a wierd ACS problem for AD group mapping.The ACS is for a institution, and one student account in AD will belong to one of the following groupsAll students in ISTAll students in ASCAll students in ENGAll students in DESAll stu...
A simple design question: is 7600 suitable for 100M internet connection with NAT? Any configuration can be done to reduce the load for the gateway? Thanks
Hi everyone, I'm having difficulty with etherchanneling. The situation is like this.I'm using a Aruba WLAN controller to form a etherchannel with a Cisco switch. Two interfaces Gi5/1 and G5/2 are binded into Port channel 3. The channel mode is on ...
Thanks, I made a mistake in SW1 configuration, the SW1 RSPAN configuration shall be:monitor session 1 source interface Po3monitor session 1 destination remote vlan 921
I think a lot of us have ever experienced this: When login to a TACACS+ enabled router, if you key in the correct pwd, it will grant you access almost in no time; whereas if you have any typo... hoho, better to get a cup of coffee from vending machin...
Hi, JG,It is obvious that the database replication function of the ACS does not meet the customer's requirement. Do you have any suggestion on how to meet the customer requirement?
Thanks a lot JG.But are you sure that this can replicates the group mapping for unknown user? Basically the configuration on the ACS are only some NAPs, external DB and unknown user group mapping.
