Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have 2 core 6509/SUP720b/PFC3/MSFC3 which are etherchannel attached. Due to budgetary restraints, we have no distribution layer and access switch trunk(2950, 3500xls) dual uplinks that are attached one to each 6509. Is it possible to form a etherch...
I am implementing 2 6509 with sup 720b/pfc3/msfc3. Seeing that cisco is going to IOS modularity for the 6500s, what is the better deployement for a enterprise core design. Should hybrid or native mode be deployed?Any thoughts or recommendations would...
I have been trying to found this documented somewhere. I am not sure why anyone would want toconfig a router this way? I get an error when I attempted to add same network on 2 router interfaces. "ipaddr" OVERLAPS WTIH FAST ETHERNET 0/0. I would like ...
I am trying to test 2 2600s routers with fractional T1 wan cards without having a data circuit. How can I get the 2 t1 wan cards to talk without an actual circuit between them. I cannot get the DCD signal to manually come up? I have tried using the i...
Ok so I have found another document stating that SR/TLB works with ethernet to tokenring. It doesnot state that it doesnot work specifically with IP.http://www.cisco.com/en/US/customer/tech/tk331/tk660/technologies_tech_note09186a00800947b2.shtmlcan ...
I found the following document. It explains translational bridging between ethernet and tokenringis only pssble for non routable protocols. It is not possible to translational bridge IP with ether/tokenring media. Can someone give me a second opinion...
When is a router not a router? when it's a bridge or switch! Can you bridge different media say one interface token-ring and other ethernet in the same router. Wouldn't this functionality be better served by another device, switch or bridge. If you c...
