12-23-2004 10:41 AM - edited 03-02-2019 08:45 PM
I am trying to test 2 2600s routers with fractional T1 wan cards without having a data circuit. How can I get the 2 t1 wan cards to talk without an actual
circuit between them. I cannot get the DCD signal to manually come up? I have tried using the ignore dcd
but doesnot seem to work. Also I am using a straight thru rj45 to connect them both. Can anyone help?
12-23-2004 11:27 AM
The biggest issue is the straight through cable. To operate back to back (without a circuit) you will need a cable that crosses transmit to receive.
HTH
Rick
12-23-2004 12:35 PM
Like Rick suggested..Cross pins 1 to 4 and 2 to 5..You will need a crimping tool to do this.
12-23-2004 12:48 PM
Thanks for the pointers. I built me own cable and am testing successfully.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide