Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
At this point, because you are doing PAT, it is only going to allow one IPSec VPN session through. What you really need to look at now is the other end of the VPN. If the VPN endpoint is set up to use IPSec over TCP or UDP, then it should work for ...
It's a fairly simple process. You will need a copy of the pix634.bin and PDM-302.bin (if you want to use the PIX Device Manager). Then you will need a TFTP server. From the console you will type "copy tftp://x.x.x.x/pix634.bin flash:" (where x.x.x....
If the DHCP server is giving them different IP addresses, then those new addresses will count towards the total number of IP's passing through the PIX. I'm not sure why the PIX does not time out those addresses in the older versions. If you type "s...
You can upgrade the license, but if there are fewer than 10 devices behind the PIX, you shouldn't have to do that. The software version I saw the problem in was 6.1(1). I have other customers on 10-user PIX'es now that do not seem to be having prob...
Is this a 10 user license 501? If so they may be going over the license limit. The PIX keeps track of that by the IP addresses that have gone through it. Rebooting the PIX clears the list. I ran into the same thing a few years ago. The "show loc...
