Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I've got an ESXi 6.5 host on a Cisco C220 M4 server, and it's connected to a Catalyst 2960-X stack. The host is on VLAN 11, and the guests are on VLAN 22 (two different vSwitches, and different physical ports on the Catalysts). This has all been wo...
There are currently downloads available for AnyConnect version 4.6 and 4.7. The 4.7 notes say that it is the future maintenance path, and anyone on 4.anything else need to upgrade to 4.7 for fixes. However, the 4.6 download that is up is actually n...
We're looking at replacing our older ASA 5505, and trying to decide what direction to go. We 100% need SSL VPN, so unfortunately the Meraki line is out as far as I can tell. So now looking at the ASAs (and which software image we'd run) vs the NGFW...
I added a new identity certificate to my ASA 5505. I am currently seeing both the old and the new ones listed, with different trustpoint names. If I try to delete the old certificate - either through the ASDM under identity certificates, or with th...
We're trying to do some very basic QoS on our very basic network. We have some stacked Catalyst 2960Xs, behind an ASA 5505. We just want to prioritize (as much as possible, given the limited equipment) voice packets. These would be from non-Cis...
I'll have to dig that out when I'm back in the office. However, how/why do you think it might be looping when pinging one address on a VLAN but not another? And the same for the other VLAN? Also, as mentioned, the config is identical to a host tha...
That is definitely closer to up to date - thank you! Although the blog post does say AnyConnect isn't supported, and it looks like it was added a couple of months after that. The SSL VPN features not at parity was concerning, so I searched more on ...
