Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello everybody,
I am facing some problems with an encrypted IPSec connection over a GRE tunnel.
Communication goes from R1 to R2, with a R-nat translating R2 private address.
( R1 ) ---------- INTERNET ----------( R-nat )------LAN------ ( R2 )1.1....
Hello,
we have seen a strange behaviour in the stack created with two Catalyst 3850. The only evidences we could take were logs.
The problem started at 6:03. After losing stack, switch-2 had no working ports, until 10:39 when it was rebooted (A...
Hi,
we are planning the update of a Cisco ASA 5515 from version 8.1(6)2 (ASDM version 6.6(1)) to the interim version 9.8(2) (ASDM version 7.8(2)) .
The upgrade path we are going to take is 8.1(6)2 --> 9.0(2) --> 9.8(2) and we would like to know exp...
Hi everybody,
I wanted to ask if it's safe to upgrade an ASA Active/Standby cluster running 8.6(1) image, to the new 9.4(4) version.
Following the upgrade page indications (https://www.cisco.com/c/en/us/td/docs/security/asa/migration/upgrade/upgrade....
Hi guys,
We have 2 routers 2921 with the same ios, version ... one with FCZ181360N8 serial number and other FCZ181360N4.
Last day we had a problem with one of them when they lose electricity power. And only the router with S/N FCZ181360N8 lost the ...
Yes, it seems the best thing we can do right now.
One last question; is it safe to update directly from 3.2.3 SE to 3.6.8E MD? Or an intermediate version is required/recommended?
Thank you,
Hi John,
the stack is running the following version:
Switch Ports Model SW Version SW Image Mode------ ----- ----- ---------- ---------- ---- 1 32 WS-C3850-24T 03.02.03....
