Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, Our ASA is managing many vlan and is the gateway of all our machines, a simple setup.We need to change the ASA.Our idea is to use our SX350X switch stack to route traffic to either the old firewall, either the new one.For that we only need to ch...
Hi, we are banging our head on a problem that seems simple Let me explain the problem : VPN Between ASA (192.168.199.0 and 192.168.214.0) and Cisco 800 (192.168.1.0)On the ASA the networks 192.168.1.0 exists for another VPN, then we have to NAT on ...
Hi, i'm facing a weird problem : i have 2 cisco 921 having 4 ports integrated switch. Ports giga0 and giga1 belongs to vlan 1.Hsrp is configured on int vlan1 of each router.Then we uplinked both routers using giga0 ports and a pc plugged on giga1 We ...
Hi All, i used to configure multirouting with no problem. Here i have to do it one more time and nothing works, i do not know why.Then i fall back to a very simple config : multicast routing between 2 routed interfaces on the same router -> same prob...
Hi,
Please let me explain where is my problem :
with QoS on routers, i know how to garanty an amount of bandwith when link speed is known :
- create a parent policy and shape the traffic speed to 95% of the bandwith
- create a children policy w...
Many thanks for that, in fact we looked for "12" into the admin guide and did not found anything, your search is better We saw that max value is 32, not sure this will be enought, but we'll go and see. By the way, many many thanks Have a nice day
Hi Jon, Yes using the same route-map applied on all vlan could be done, but the limit is not on the number of route-map but number of sequences/sections. Here is what we did to try it, same issue : Thanks for you advices.
Hi Georg, thanks for your reply, we search also into doc and were unable to find that limit, but when configuring we have : And i agree about "small business" but 12 is really a little limit !
Hi Paul and thanks for you quick reply.In fact we need one PBR per Vlan, then one route-map per vlan and we have 10+ vlanThe 12 limit is not for each vlan but is global, that is our issueIf it would be 12 route-map per PBR that would be great
