Dear Community, we want to know if a BGP session between an FTD and an ISR can be established supporting additional-paths capability. We tried BGP session with additional-paths capability between two ISRs and it is working properly. Many thanks
Dear Community, Are there any actual benefits if we implement different VLANs between endpoints and Unified Servers (CUCM, Unity, etc)?If yes shall we put CUBE in servers' vlan or in the same as endpoints ?In my opinion we gain a bit of security segr...
Dear Community, Is there a way in a cisco cube when configured with SIP registration each SIP invite to follow the SIP registrar ?I believe that even we are registered in a server when SIP invites arrive in Cube the process starts again from the beg...
Dear Roger, thank you for your fast response which helped me a lot.What you wrote is absolutely clear for me and as you mention it appears in the SRND. The second part of my question is if there is a similar need for CUBE, SRST reference router and S...
In SRST router you have to configure: Voice register global --> SIP SRST (probably you have already configured)Telephony Service --> SCCP SRST (this way VG will register there) example:telephony-servicesrst mode auto-provision nonesrst dn line-mode d...
My guess was right... this is the meaining of prepend. Prepend means you add your as path as many times as you define.In your configuration you add your as path one more time... so you will have it two times (one is be deafult in bgp advertisements)....
If you have not configure it in your route-map out (as-path prepend etc) probably your ISP is doing this manipulation (to distinguish between backup paths etc). No need to worry about this.
Hello, check this: Show Interface SummaryThe TXBS field gives the total output traffic on the router. In this example, total output traffic is 3.1G (2680945000 + 372321000 = 3053266000).Router#sh int summary
*: interface is up
IHQ: pkts in input h...
.jpg "Hall of Fame Master"){kind=icon}
.jpg "VIP Expert"){kind=icon}
