About smstoyanov

smstoyanov · 02-22-2018

Hello, i met some issue with this example.Because i dont want to expand this guest_vlan i tried this config: interface vlan 124name LANGUEST-VLANip address 192.168.124.1 255.255.255.248dot1x guest-vlan ip dhcp serverip dhcp pool network LANGUEST-POOL...

smstoyanov · 02-06-2018

Here is my config for the IPsec connection. tunnel-group XX.XX.XX.XX type ipsec-l2ltunnel-group XX.XX.XX.XX general-attributesdefault-group-policy IPSEC_IKEV1_Filterstunnel-group XX.XX.XX.XX ipsec-attributesikev1 pre-shared-key ***** access-list ...

smstoyanov · 02-22-2018

Restrictions for IEEE 802.1X Guest VLAN The IEEE 802.1X Guest VLAN feature is available only on a switch port. You can configure any VLAN except an RSPAN VLAN or a voice VLAN as an IEEE 802.1X guest VLAN. The guest VLAN feature is not supported on in...

smstoyanov · 02-22-2018

Hello Richard The pool is for test and on this port is connected only me. I said that when I remove all dot1x parameters and configure my port 1/1/19 with access 124 the ping works but in this situation with dot1x authentication not. I prefer this s...

smstoyanov · 02-06-2018

Thanks Bogdan, it works perfectly .

smstoyanov · 02-06-2018

Hello Bogdan, thanks for the fast reply but i think that it will not work because ASA uses opposite direction related to nat rules. For example, you can nat : inside to outside outside to outside but outside to inside is not the relevant answer. Coul...

Member Since	‎10-09-2017 07:07 AM
Date Last Visited	‎04-24-2018 04:24 AM
Posts	7

User Statistics

User Activity

DHCP server on SG500X responsible for guest vlan

port forwarding through IPsec tunnel

Re: DHCP server on SG500X responsible for guest vlan

Re: DHCP server on SG500X responsible for guest vlan

Re: port forwarding through IPsec tunnel

Re: port forwarding through IPsec tunnel