About pdostal

pdostal · 01-03-2006

I was wondering if I could connect 2 ML cards installed in the same ONS 15454 to the same RPR ring. Thanks!

pdostal · 10-05-2004

I need to configure a CSS service to stay in a down/suspended status when it fails (even when the actual server/service becomes available) - manual failback. Any suggestions? Thanks.

pdostal · 09-09-2004

One of our engineers had the following issue on a Cisco Catalyst 6500 MSFC card.He configured an extended access-list permitting SSH from a specific source host IP to one of the interfaces (VLAN) on the MSFC. He applied the ACL to the VTYs through an...

pdostal · 08-04-2004

My understanding is that PIX520 (6.3(3)) can support up to 6 physical interfaces. Can I install 2 quad cards in a PIX520? Would PIX520 enable only first 6 interfaces?Thanks,Peter

pdostal · 01-03-2006

Thanks! I appreciate your help.

pdostal · 10-06-2004

Thanks! I didn't know that you could actually execute a config command within a script. Thanks again.

pdostal · 10-05-2004

I wrote a few CSS keepalive scripts, but I don't know how could I suspend a service within a script. Would you please share your expertise? Thanks!

pdostal · 09-10-2004

There is a host entry in the ACL only, no wildcard.

Member Since	‎02-09-2004 11:38 AM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	8

User Statistics

User Activity

ONS 15454 SDH with 2 ML cards connected to the same RPR

CSS: How to keep a failed service suspended

MSFC - access-class with extended ACL

PIX520 with 2 quad cards

Re: ONS 15454 SDH with 2 ML cards connected to the same RPR

Re: CSS: How to keep a failed service suspended

Re: CSS: How to keep a failed service suspended

Re: MSFC - access-class with extended ACL