Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Good Morning allI'm having an issue with an internal ipsec tunnel between two pix's. The tunnel is built between two outside interfaces but the packets are being dropped at the inside interface with a no traslation group error, despite having the cor...
Hello.I am trying to get DACL's working on my FWSM (2.3(3)) From ACS 4. The users authentication is passes through to an RSA 6.1 token server. The user authenticates fine, however the ACL is not downloading.The bebug shows the following as the user a...
Hi We are going to deploy two 3015's in seperate sites with seperate internet entry points and a backend WAN conecting both sites. I have some concerns regarding vendor LAN2LAN access. If we suffer an interface failure on the internal interface of ou...
Hi we have about 900 2600 routers on our network most of these have a 50% have a standard configuration and the rest are made up of various small differances from the standard. Up until now we have always used a custom script to up date the configura...
This maybe of some interest to you.http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Security&topic=AAA&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1ddaf8ce/2#selected_messageMake sure you have a permit statement ...
The problem appears to be a bug in the FWSM code that we we're running 2.3(3)2 and also in 2.3(2). Version 2.3(4) appears to resolve this issue. This is a result of the FWSM generating two RADIUS request packets with the same ID for the ACL instead o...
