About emoses

emoses · 06-16-2005

VPN Client -> PIXw/PAT -> VPN ServerVPN Client Source 10.1.1.153 - internal addressVPN Server Destination 69.245.9.1 - external addressSource is trying to send ipsec traffic through a FW1 that does PAT. The internal ip address/port (10.1.1.153:500) i...

emoses · 01-05-2005

Hello,I'm new to networking.. can someone provide me some insights about NAT'ing between two private networks.Device A (192.168.1.4) in Network 1 needs communicate with a device B (10.0.0.5) in Network 2 using a tcp port.On the NAT router - device B ...

emoses · 02-18-2004

The system and port LED's are amber. Ports 9-12 are experiencing this issue. These are unused ports that have been administratively taken down.I get the following output when I used the sh post command:POST FAILED: FastEthernet0/9 failed front-end lo...

emoses · 06-17-2005

VPN Client is using NAT-T. I've setup isakmp nat-traversal on the firewall.should i setup a static pat to limit the outside address to port 500... such asstatic (inside, outside) udp outsideip 500 insideip 500 netmask 255.255.255.255 0 0Thanks,E

emoses · 06-16-2005

I do have isakmp nat-traversal. What should I check on the FW?Thanks,E

emoses · 01-05-2005

The ip route does it! :)Thanks!EM

Member Since	‎02-17-2004 12:57 PM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	6

User Statistics

User Activity

VPN Client -> PIXw/PAT -> VPN Server

NAT'ing dilemma

2924 XL System and Port LEDs are amber

Re: VPN Client -> PIXw/PAT -> VPN Server

Re: VPN Client -> PIXw/PAT -> VPN Server

Re: NAT'ing dilemma