About jpcastro

jpcastro · 12-06-2002

The Status light (middle) have this behaviour: steady, then a small blink, steady, a smmal blink, and so on. But the devices are working and the communication is OK.I've checked the normal blink when I shut down one bridge, but when I turn it on agai...

jpcastro · 12-03-2002

I've got the following problem with my callback configuration:1) Dial-up with Windows 2000 2) The router answer the call and authenticate the user3) The PC wait for the callback4) The router dials to the PC5) The PC answer the call6) The PC can't aut...

jpcastro · 05-16-2002

I want to deny access to messeneger. I've tried blocking port 1863 but when messenger finds this port blocked, it start a connection through port 80.Obviusly I can't block port 80.Any Ideas?

jpcastro · 12-08-2004

The command configure net should be executed in global configuration mode.

jpcastro · 09-04-2003

I Think that the problem begins when you apply the access-list to the interface, you must explicit allow the traffic from dmz to outside.

jpcastro · 02-25-2003

You can add a new DMZ to your PIX and route traffic from each proxy to the matching ISP.

jpcastro · 12-05-2002

I've tried the async mode dedicated but doesn't work. As you can see I'm using user znoopydog to callback, this isn't a windows user.Do I need to create this user in windows?

jpcastro · 12-04-2002

Debugs.08:16:01: TTY4: autoconfigure probe started08:16:09: TTY7: autoconfigure probe started08:16:09: TTY6: autoconfigure probe started08:16:09: TTY2: autoconfigure probe started08:16:11: TTY3: autoconfigure probe started08:16:17: TTY1: autoconfigur...

Member Since	‎06-08-2001 01:33 PM
Date Last Visited	‎08-18-2017 03:50 AM
Posts	9

User Statistics

User Activity

Weird Status Light on 350 bridge

CallBack Problem with 2509

Blocking windows messenger XP

Re: Copying config from Pix to TFTP

Re: Trouble understanding DMZ interfaces and rules

Re: Connecting two proxies to Internet

Re: CallBack Problem with 2509

Re: CallBack Problem with 2509