Weird Status Light on 350 bridge

[jpcastro]

The Status light (middle) have this behaviour: steady, then a small blink, steady, a smmal blink, and so on. But the devices are working and the communication is OK.

I've checked the normal blink when I shut down one bridge, but when I turn it on again the status light is strange again.

Please help

Juan

[tepatel]

Here is some more details about that status led..See which one is applied..

The status indicator signals operational status. Blinking green indicates that the bridge is operating normally but is not associated with any wireless devices. Steady green indicates that the bridge is associated with a wireless client.

For repeater bridges, blinking 1/2 on, 1/2 off indicates the repeater is not associated with the root bridge; blinking 7/8 on, 1/8 off indicates that the repeater is associated with the root bridge but no client devices are associated with the repeater; steady green indicates that the repeater is associated with the root bridge and client devices are associated with the repeater.

[tepatel · Accepted solution]

Here is the url for more on that,

http://www.cisco.com/univercd/cc/td/doc/product/wireless/airo_350/350brdgs/brhig/br350ch4.htm#xtocid1