Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,I tried to reconfigure a 3750 switch with startup config erased. After I issue the command "speed 115200" under the console line configuration, the terminal was stuck at this point. I thought it would work if I reopened the console session wit...
Hi all, I have around 50 2702 APs joined to a WLC5508, however, some of the APs are occasionally reset by controller. One of the APs reboots more frequently than other APs for around 3-4 times a week. The controller software version is 8.3.133.0 and ...
I used the same computer same serial console before and after the command "speed 115200" was issued. Then I rebooted the switch, as the switch had its startup config erased, I assumed it rebooted as factory default. The terminal showed the output nor...
Hi Leo, thanks for your reply, the "dir" output is as followed. FYI reference the ap was reset today at around 9am (GMT+8) and joined WLC at 09:03:49.499 (GMT +8) AP1#dirDirectory of flash:/2 -rwx 145 Oct 3 2019 01:03:50 +00:00 capwap-saved-config3 -...
